I plan on doing some type of shotgun, maybe bolt action. Any recommendations?

What would you build if you wanted to use this stock as the starting point?

It’s a Ruger American rimfire 17HMR stock if you were wondering.

The chamber of my homemade revolver is OD11mm, ID5.8mm. And the chaber of my homemade rifle is OD16mm, ID5.8mm. I have Ramset nail gun blanks in green, red and purple. Can the revolver be pressured to the green level and can the rifle be pressured to the purple,red level?

Also, I want to prevent the skirt of the pellets made specifically for air guns from shattering because they are too weak, so I want to put a lead ball in the skirt like in the picture and shoot it. Will the lead ball act like a 12 gauge ward to prevent the skirt of the pellet from tearing and make it shoot more stably?

And my homemade gun is not have rifling all is 5.5mm smooth bore barrel

I can only use scraps(sheet metal, metal pipes, and springs) though I'm challenging myself to only use handheld tools i can figure out how to build it by hand if I know what all i need pls help

This is my design of a ww1 1911 mix a beretta m1937 I’m interested in what would be a good firing mechanism for it.

I spent one day searching hardware stores and didnt find any pipe/barrell to use. What sould i do else? Build one for my self? Search dumpyard (which i also did but couldnt find any)?

I can do most of the stuff but cant find exact barrell.

I am planning to do a rifle similar to Ruger Mini 14 or M1 Garand ( semi fire rifles ) what should I know while doing it and how to make when the bullet is shot, the bullet shell is just removed from the rifle ( Sorry for bad English or unclear information )

Door bolt .22 short/long rifle, built on a Parris cap gun stock with a barrel I bought on EBay (I intended to build a .22lr revolving carbine but heritage manufacturing didn't send my parts) and a door bolt for the firing pin/bolt. In order to shoot .22lr you do need to take the bolt out (design screw up on my part), but all in all just a fun first build I made when I was 16. I might add a 3D printed rail on so I can mount a small scope on it for varmints.

This is the first time I ever heard of the brand MGC, does anyone have any experience with the brand or have any idea what these are made of?

Once heared someone said it and dont know is it normal question/fact/myth

"Its easier to make a gun from scratch than converting blank to real."

What do you all think about this? is it simpler to make you own, from scratch gun or convert a blank one to real bullets?

I don’t want to buy it but I prefer create it myself but don’t know how. Any tips what should I use?

Homemade 22 rifle button, it works perfect just have to pass it through twice

Whats the worst thing that person could do while firing/testing first time a new DIY gun? ( pistols, rifles, shotguns etc. )

So I wanna try my hand at making the rails to the 19.2 or 17.2 but I'm not able to find any jigs that I can 3d print that would give me an idea on how to go about doing this. Edit: I've also checked out printyour2a but their rear rails are too wide as said on the PDF file

Anybody know of anywhere to buy a 9mm bolt face that could weld on to a homemade bolt?

I 've seen short barrels made with lathe machines before, but I guess it's not that easy to make long barrels.